"TSS" Turbo Seal Series - Specialty Worm Drive Clamps

SAE Type "T"

A constant tension worm gear clamp designed to compensate for the effects of thermal cycling and/or compression set of hose. Turbo Seal’s convoluted spring action band solves this problem. This clamp is used in automotive, off-highway, agriculture, heavy duty, aircraft (non flight critical applications only), and military industries and can be found on turbo chargers, tanks, air-to-air, cooling, and fuel lines.

Murray’s unique “DUAL BEAD SHIELD” concentrates band sealing pressure, increasing performance up to 30% compared to standard smooth liners. Flanged edges protect soft hose compounds.

Rated Ultimate Torque: 75in.lbs. (8.47 Nm)
Recommended Installation Torque: 50in.lbs. (5.65 Nm)

Turbo-Seal Specifications*
Band Material: Special “400” Series Stainless*
Housing Material: AISI 300 Series Stainless
Shield Material: AISI 300 Series Stainless

*Special“400” series stainless steel band, while magnetic after heat treatment, has corrosion resistance equivalent to 304SS.
Note 1: Manufactured “Open” (or max) diameters listed here are 1/8” (.125) (3mm) larger than those listed in SAE J1508.
Note 2:Closed diameters are same as SAE.

Turbo Seal Size Chart
Clamp Part No.		"A" Diameter Range
"300" Series Stainless Screws	Decimals		Inches		Millimeters
"300" Series Stainless Screws	Min.	Max.	Min.	Max.	Min.	Max.
TSS14S30	1.12	1.50	1-1/8	1-1/2	28	38
TSS16S30	1.20	1.63	1-1/5	1-5/8	30	41
TSS18S30	1.28	1.75	1-1/4	1-3/4	33	44
TSS20S30	1.37	1.88	1-3/8	1-7/8	35	48
TSS24S30	1.56	2.13	1-9/16	2-1/8	40	54
TSS28S30	1.63	2.38	1-5/8	2-3/8	41	60
TSS32S30	1.80	2.63	1-13/16	2-5/8	46	67
TSS36S30	1.97	2.88	1-31/32	2-7/8	50	73
TSS40S30	2.25	3.13	2-1/4	3-1/8	57	79
TSS44S30	2.50	3.38	2-1/2	3-3/8	64	86
TSS48S30	2.75	3.63	2-3/4	3-5/8	70	92
TSS52S30	3.00	3.88	3	3-7/8	76	98
TSS56S30	3.25	4.13	3-1/4	4-1/8	83	105
TSS60S30	3.50	4.38	3-1/2	4-3/8	89	111
TSS64S30	3.75	4.63	3-3/4	4-5/8	95	118
TSS68S30	4.00	4.88	4	4-7/8	102	124
TSS72S30	4.25	5.13	4-1/4	5-1/8	108	130
SS76S30	4.50	5.38	4-1/2	5-3/8	114	137
TSS80S30	4.75	5.63	4-3/4	5-5/8	121	143
TSS84S30	5.00	5.88	5	5-7/8	127	149
TSS88S30	5.25	6.13	5-1/4	6-1/8	133	156
TSS92S30	5.50	6.38	5-1/2	6-3/8	140	162
TSS96S30	5.75	6.63	5-3/4	6-5/8	146	168
TSS104S30	6.25	7.13	6-1/4	7-1/8	159	181
TSS112S30	6.75	7.63	6-3/4	7-5/8	172	194
TSS116S30	7.00	7.88	7	7-7/8	178	200
TSS120S30	7.25	8.13	7-1/4	8-1/8	184	206

Other sizes available upon request. Available in packed and bulk stock. Other packaging configurations available.