|
 |
Constant Tension Turbo Seal Clamps - With convoluted heat treated band that provides spring-like tensioning effects for thermal cycling hose applications.
Murray’s unique “DUAL BEAD SHIELD” concentrates band sealing pressure, increasing performance up to 30% compared to standard smooth liners. Flanged edges protect soft hose compounds.
For smaller quantities go to Top Performance Parts at www.topperformanceparts.com
|
|
|
Dual Bead Super Sealing Clamp - For air to air and coolant applications. The inner shield provides superb sealing characteristics and is safe for all softer hoses. It can also be found in the marine, agriculture, construction and off highway markets.
For smaller quantities go to Top Performance Parts at www.topperformanceparts.com |
|
|
 |
HDL High Torque Series Clamps - All 316 series stainless steel clamp designed for plumbing applications. 1/2" inch wide band is thicker than standard worm drive clamp. This construction yields superior performance in corrosive environments. Applications include plumbing, water well, municipal storm drain systems, irrigation, marine and transportation. |
 |
T-SS Series Thumbscrew Clamps - Band and housing are 200/300 stainless steel with heat treated 400 series thumb screw. General-purpose clamp for applications that require only finger tightening. |
|
|
 |
Embossed Style Hose Clamp - These clamps are preferred by the European original equipment and replacement markets; the non-perforated rolled band protects silicone and other soft hose surfaces from extruding or shearing during installation, providing ultimate exterior hose wall protection. This style of hose clamp is commonly used in automotive, industrial, mining, hydraulic, marine and general hardware applications. |
|
|
