SAE Type "A" Wire Grip Hose Clamps - Other Specialty Model Clamps

• Double sealing action provides even pressure at every point.
• Plated to protect against rust and corrosion.

Unique Swivel Nut:
• Nut is integral part of clamp to prevent loss.
• Nut remains perfectly aligned with screw.

• Standard zinc plated material; other plating types available at additional cost. (quoted upon request)
• Standard wire diameter: 12 gauge (.1055in +/- .003in) (2.68mm+/- .08mm)

Rated Ultimate Torque: 40in.lbs. (4.5Nm)
Recommended Installation Torque: 20-25in.lbs. (2.3-2.8Nm)

WIRE GRIPS ARE NON-STOCKING PARTS.
Produce & release policy requires firm purchase order and specific release dates.
Packaging: Bulk. Minimum: 500 Units per Part No. per Release. Delivery: Determined at the time of order.
Typically: 4 wks ARO for Standard Plating, 6 wks ARO for Special Plating.

		"A" Diameter Range
SAE No.	Part No.	Inches		Millimeters
SAE No.	Part No.	Open*	Closed	Open	Closed
34	102100	1.06	0.94	26.9	23.9
36	102102	1.12	0.99	28.4	25.1
38	102104	1.19	1.06	30.2	26.9
40	102106	1.25	1.12	31.8	28.4
42	102108	1.31	1.16	33.3	29.5
44	102110	1.38	1.19	35.1	30.2
46	102112	1.44	1.25	36.6	31.8
48	102114	1.50	1.31	38.1	33.3
50	102116	1.56	1.38	39.6	35.1
52	102118	1.62	1.44	41.1	36.6
54	102120	1.69	1.50	42.9	38.1
56	102122	1.75	1.56	44.5	39.6
58	102124	1.81	1.62	46.0	41.1
60	102126	1.88	1.69	47.8	42.9
62	102128	1.94	1.75	49.3	44.5
64	102130	2.00	1.81	50.8	46.0
66	102200	2.06	1.88	52.3	47.8
68	102202	2.12	1.94	53.8	49.3
70	102204	2.19	1.97	55.6	50.0
72	102206	2.25	2.03	57.2	51.6
74	102208	2.31	2.12	58.7	53.8
76	102210	2.38	2.19	60.5	55.6
78	102212	2.44	2.25	62.0	57.2
80	102214	2.50	2.28	63.5	57.9
82	102216	2.56	2.34	65.0	59.4
84	102218	2.62	2.41	66.5	61.2
86	102220	2.69	2.47	68.3	62.7

*Sizes larger than shown available upon request.
*Open diameter tolerance + .30" (.76), -.000"