Page 17 - Murray Corporation
P. 17

YOU GET MORE WITH MURRAY
Spring-Loaded T-Bolt Clamps - SAE Type “TBLS"
• Murray spring-loaded clamps are designed to compensate for the expansion and contraction of hose caused by temperature and/or hose cold flow. Typical installations include silicone hoses on charge air cooling/air to air, after cooling systems, and primary engine coolant systems.
• TBLS series clamps use a plated steel self-locking nut, bolt and spring. The balance of the components are made from 300 series stainless steel. Band edges are rounded to protect hoses.
• More material configurations available.
NOTE: Coil springs should not be compressed to solid at installation. Make sure the nut is positioned approximately one to two turns from solid. This allows the clamp to expand and contract.
Clamp Series
TBLS132
TBLS145
TBLS169
TBLS212
TBLS236
TBLS261
TBLS286
TBLS308
TBLS333
TBLS358
TBLS383
TBLS408
TBLS433
TBLS458
TBLS483
TBLS508
TBLS533
TBLS558
TBLS586
TBLS608
TBLS633
TBLS655
TBLS686
TBLS708
TBLS736
TBLS758
TBLS783
TBLS811
TBLS858
TBLS880
Diameter Inches Diameter Millimeters
Nominal Min. Max. Nominal Min. Max.
1.25 1.12 1.32 32 28 34
1.40 1.26 1.45 36 32 37
1.60 1.50 1.69 41 38 43
2.00 1.82 2.12 51 46 54
2.25 2.06 2.36 57 52 60
2.50 2.31 2.61 64 59 66
2.75 2.56 2.86 70 65 73
3.00 2.78 3.08 76 71 78
3.25 3.03 3.33 83 77 85
3.50 3.28 3.58 89 83 91
3.75 3.53 3.83 95 90 97
4.00 3.78 4.08 102 96 104
4.25 4.03 4.33 108 102 110
4.50 4.28 4.58 114 109 116
4.75 4.53 4.83 121 115 123
5.00 4.78 5.08 127 121 129
5.25 5.03 5.33 133 128 135
5.50 5.28 5.58 140 134 142
5.75 5.56 5.86 146 141 149
6.00 5.78 6.08 152 147 154
6.25 6.03 6.33 159 153 161
6.50 6.25 6.55 165 159 166
6.75 6.56 6.86 171 167 174
7.00 6.78 7.08 178 172 180
7.25 7.06 7.36 184 179 187
7.50 7.28 7.58 191 185 193
7.75 7.53 7.83 197 191 199
8.00 7.81 8.11 203 198 206
8.50 8.28 8.58 216 210 218
8.75 8.50 8.80 222 216 224
MORE
SIZES AVAILABLE
0.75 [19.05] REF.
UPON REQUEST
3.50 REF. 1/4-28
7/16" HEX
.025 REF. [0.64]
Murray Corporation Ph: 410-771-0380
260 Schilling Circle Fax: 410-771-5576 Hunt Valley, MD, 21031, USA
www.murraycorp.com


































































































   15   16   17   18   19